This analog handheld dynamic microphone works great for picking up only what’s in front of it, and rejecting other noise/sounds in the room. If you are going to use multiple microphones for a number of sound sources like instruments one day and a guest speaker the next, then have a look at the Q8x. If you are working in an untreated room, or in an area with a lot of ambient noise, a dynamic microphone is your best choice. You can plug a second sound source into the back of it, and it has three of pickup patterns* that make it a great choice for music, speech, voiceover, and more. This condenser microphone can connect directly to your computer without an audio interface. If you’re going to set up a computer for recording and have a ‘dedicated station’, I can think of no better choice than the Samson G-Track Pro. Some mixers have an audio interface built-in specifically for this purpose, and that can certainly simplify things a bit. Setting up a system with XLR mics will require you to have an audio interface to convert your analog audio signal into a digital one that a computer can understand. Its 3-pin system allows mics to connect to mixers, preamps, audio interfaces, and more. XLR has been the ‘mic cable’ standard for quite a long time. with a dedicated audio interface or a mixer with effects), an analog microphone is the way to go. If you want to use multiple microphones or have more control over the signal before it enters the computer (e.g. But with this simplicity comes a trade-off, the nature of those devices and some software typically allow for using only one mic at a time. USB microphones are wonderfully convenient, by incorporating analog-to-digital converters right in the microphone allowing you to connect and record directly to a computer with just a USB cable.
0 Comments
Leave a Reply. |